Myro Reference Manual
From IPRE Wiki
Myro is a new framework for programming robots. It is written in the language Python and designed for use in Introductory Computing courses. It is being developed by the Institute for Personal Robots in Education.
Getting Started
All the commands from Myro are available in Python by importing them. Here is a quick start list:
- Double-click on the "Start Python" icon on the desktop
- Enter: from myro import *
- Turn on the robot, and connect via Bluetooth
- Now, you can enter init() and type the COM port of your robot
To test that everything is working, try:
>>> from myro import *
If you have a gamepad:
>>> gamepad()
Otherwise:
>>> joyStick()
Manual Drive
gamepad(): runs a program to control the robot through a gamepad. Optionally takes four string parameters that are items for the computer to speak.
senses(): Opens a window to see the robot's sensor values.
joyStick(showSensors = 0): opens a joystick window; click and drag to move robot. Pass a 1 to joystick() to see sensor values, too.
Output Functions
beep(self, duration, frequency, frequency2 = None): make a tone. If two tones are given, the robot will combine them.
speak(message, async = 0) - text-to-speech, turns message into spoken words
stopSpeaking() - stop the speaking, if speaking asynchronously
getVoice() - get the voice of the current speaker
getVoices() - get a list of all of the possible voices
setVoice(name) - set the voice to a known voice by name
Input Functions
ask(item) - will ask one time for item(s)
>>> ask("Name")
(window pops up, user enters Sarah, presses Ok button)
'Sarah'
raw_input(prompt) - will prompt user for input. Like ask, but no window. This returns a String value.
>>> raw_input("How old are you? ")
How old are you? 19
'19'
input(prompt) - will prompt user for input. Like ask, but no window. This returns a number value (either real or integer).
>>> input("How old are you? ")
How old are you? 19
19
askQuestion(question, [answerList]) - prompt a question and return answer.
>>> askQuestion("Are you ready?")
(window pops up, users selects Yes)
'Yes'
>>> askQuestion("How many lumps would you like?", ["One", "Two", "Three"])
(window pops up, user selects Three)
'Three'
Movement Functions
forward(amount, seconds): move forward, stop any rotation, for number of seconds
>>> forward(1, .5)
backward(amount, seconds): move backward, stop any rotation, for number of seconds
>>> backward(.9, 2)
turnLeft(amount, seconds): turn left, stop any forward movement, for number of seconds
>>> turnLeft(.4, 1)
turnRight(amount, seconds): turn right, stop any forward movement, for number of seconds
>>> turnRight(.5, 1)
stop(): stop all movement
>>> stop()
translate(amount): move forward and backwards. 0 to 1 moves forward; 0 to -1 moves backwards rotate(amount): turn left or right. 0 to 1 turns left, 0 to -1 turns right
NOTE: translate and rotate are independent, although they may both effect each the wheel. That means that a translate() and a rotate() will blend into a meaningful combination.
>>> translate(1) # full speed ahead >>> translate(-1) # full speed backwards >>> translate(0) # stop in the translate direction >>> rotate(.5) # half-speed to the left >>> rotate(-1) # full speed to the right
move(translate, rotate): rotate and translate
>>> move(0, 1) # turn full speed to left >>> move(0, -1) # turn full speed to right >>> move(1, 1) # turn full speed to left while moving full speed ahead >>> move(.5, 0) # go forward half speed
motors(left, right): control the left and right motors
Reading Sensors
getLight(pos): read a light sensor on the scribbler; defaults to "all"
getIR(pos): read an IR sensor on the scribbler; defaults to "all"
getLine(pos): read line sensor on the scribbler; defaults to "all"
getStall(): read stall sensor on the scribbler
NOTE: Every time you issue a move command, the stall sensor resets, and it needs to wait a short time to see whether the motors are stalled. This means that the sensor won’t give accurate results if you test it too soon after the robot starts to move.
getName(): read the robot's name
getPassword(): read the robot's password
getAll(): read all positions of all of the major sensors; returns a dictionary
getVolume(): returns 0 or 1
getData(): get some bytes stored in the robots memory
getInfo(): retrieve information about the robot
getBright("left" | "middle" | "center" | "right" | 0 | 1 | 2): read one of the Fluke's virtual light sensors. The Fluke's virtual light sensors report the total intensity in the left, center, and right sides of the Fluke's camera.
getObstacle("left" | "middle"| "center" | "right" | 0 | 1 | 2): read one of the Fluke's IR obstacle sensors (see setIRPower below). Higher values mean that IR light is being reflected (e.g an obstacle is detected), a low value means IR is not being reflected and there seems to be open space in that direction. The value ranges from 0 to 6400.
getBattery() gets the voltage of the battery (note: If the battery drops below ~6.1V the Fluke's back LED will flash to alert you to change or preferably recharge your batteries)
get(sensor): read the sensor "stall"; or get all readings of "ir", "light", or "line"; or get "all" which is all of those. Also can get "config".
get("config"): returns meta data about the robot's hardware
get(sensor, pos): read any of the following sensors or items by name and position
>>> get("stall")
0
>>> get("light", 0)
128
>>> get("line")
[0, 0]
>>> get("all")
{'light': [235, 13], 'line': [1, 0], 'ir': [0, 0], 'stall': 0}
>>> get("all") # using a fluke
{'battery': 6.2436550642715174, 'light': [13176, 3058, 1848], 'ir': [1, 1], 'obstacle': [0, 0, 0],
'bright': [193536, 193536, 193536], 'stall': 0, 'blob': (0, 0, 0), 'line': [1, 1]}
wall( threshold=4500): returns True if getObstacle(1) is > threshold (threshold defaults to 4500)
Setting Values
setLED(position, value): set a LED
>>> setLED("left", "on")
>>> setLED("right", "off")
setName(name): set the robot's name (limit of 16 characters)
>>> setName("Howie")
setVolume(level): set the speaker's volume (0/"off" or 1/"on")
>>> setVolume("off")
>>> setVolume(0)
>>> setVolume("on")
>>> setVolume(1)
setData(position, value): set a byte of data in the robot's memory to a value between 0 and 255.
setLEDFront(value): turn on the led on the front of the Fluke (0 for off and or 1 for on)
>>> setLEDFront(1) # turn on the Fluke's front LED
>>> setLEDFront(0) # turn off the Fluke's front LED
>>> set("led", "front", 0) # turn off the Fluke's front LED
setLEDBack(value): turn on the LED on the back of the Fluke. The brightness of this LED is configurable between 0-1.
>>> setLEDBack(0.5) # turn on the Fluke's back LED at 1/2 brightness
>>> setLEDBack(1.0) # turn on the Fluke's back LED at full brightness
>>> set("led", "back", 0) #turn off the Fluke's back LED
setIRPower(power): set the output power of the Fluke's IR obstacle sensors (defaults to 135). If getObstacle() always reports high values try lowering the IR output power. If you always receive a zero value, try increasing the power. The power value should be between 0 and 255.
>>> setIRPower(135) >>> setIRPower(140)
darkenCamera(level): turn off the camera's auto-exposure, auto-gain, and lower the gain to "level:. This is useful when using the getBright() virtual light sensors.
manualCamera(gain=0, brightness=128, exposure=65): turn off the camera's auto-exposure, auto-gain, and auto-white balance, and set the gain (integer in the range 0-63), brightness (integer in the range 0-255), and exposure manually (integer in the range 0-255). (In version 2.8.3 of myro)
autoCamera(): turn on the auto-exposure, auto-gain, and auto-color-balance.
set(item, value): set a value (for "name", and "volume")
set(item, position, value): set a value (for "led")
>>> set("name", "Duckman")
>>> set("led", "center", "off")
>>> set("volume", "off")
Flow of Control
If you wished to perform a loop for 5 seconds, you could use one of the two following idioms:
while timeRemaining(5):
print "running..."
for seconds in timer(5):
print "running for", seconds, "..."
loop(function1, function2, ..., count) - a simple looping system so students can do a function a fixed number of times. loop() also stops the robot at the end.
Image processing
The following objects and functions are related to the camera functions on the Scribbler. There are two different interfaces: the Multimedia interface (largely based on Mark Guzdial's introductory book), and the Graphics Object interface (largely based on John Zelle's introductory book). These are independent; however, there are methods to move between the two. The first library is built on the second.
Creating a picture, manually, from a file, or from the robot:
picture = takePicture("color" | "gray" | "blob") # gets image from robot
picture = makePicture(filename) # reads in a image file, examples: PNG, JPG, GIF
picture = makePicture(columns, rows) # creates a blank picture
picture = makePicture(columns, rows, array) # creates a new picture from an array (a column-major sequence of 0-255 values that represent Red, Green, Blue (in that order))
picture = makePicture(columns, rows, array, mode)# creates a new picture from an array, where mode = "color", or "gray"
pictureCopy = copyPicture(picture) # creates a copy of picture
Output:
show(picture) repaint(picture=None) # pixel changes don't appear until you repaint() savePicture(picture, filename) savePicture([picture, picture, ...], filename) # creates an animated GIF
The show(picture) function has a couple of mouse functions. You can click with the left mouse on a pixel and you can see "(x,y): (r,g,b)" in the window's status bar. If you click and drag a rectangle in the window, you will set the blob-tracking colors to the ranges of colors inside the bounding box.
show() can also take an optional name:
show(pic2, "name2")
so that you can show more than one image at a time.
Image dimensions:
int_value = getWidth(picture) int_value = getHeight(picture)
Predefined colors:
black = makeColor( 0, 0, 0) white = makeColor(255, 255, 255) blue = makeColor( 0, 0, 255) red = makeColor(255, 0, 0) green = makeColor( 0, 255, 0) gray = makeColor(128, 128, 128) darkGray = makeColor( 64, 64, 64) lightGray = makeColor(192, 192, 192) yellow = makeColor(255, 255, 0) pink = makeColor(255, 175, 175) magenta = makeColor(255, 0, 255) cyan = makeColor( 0, 255, 255)
Creating and manipulating color objects:
color = makeColor(r, g, b) color = pickAColor() color = getColor(pixel) setColor([pixel | color], color) makeDarker(color) # takes a color and makes it slightly "darker" makeLighter(color) # takes a color and makes it slightly "lighter"
You can also determine the distance between two colors using:
distance(color1, color2)
Pixel manipulation:
pixel = getPixel(picture, x, y) pixels = getPixels(picture) int_value = getRed(pixel) int_value = getGreen(pixel) int_value = getBlue(pixel) int_value = setRed(pixel, color) int_value = setGreen(pixel, color) int_value = setBlue(pixel, color) int_value = getX(pixel) int_value = getY(pixel) r, g, b = getRGB([color | pixel])
Red, green, and blue int_values are between 0 and 255, inclusive.
The getPixels() function is designed to be used with a for-statement, like so:
for pixel in getPixels(picture):
# do something with each pixel
You can also make a Pixmap object that allows integration into other graphics objects:
pixmap = makePixmap(picture) # turns a picture into a pixmap
Creating and displaying an object-oriented graphics system:
win = GraphWin(title) p = Point(x,y) image = Image(p, pixmap) # Utilizes the above pixmap function image.draw(win)
Note that as of Myro version 2.9.0, the Image class constructor can accept a picture (as created by the makePicture() function) directly, allowing the above code to be replaced with:
win = GraphWin(title) p = Point(x,y) image = Image(p, picture)
All types of images have an RGB value, even if an image type actually has a palette (such as gif files), or grayscale images. Images that have a palette will use the palette entry for getColor(), and will look-up the closest color in the palette when using setColor(). For example, if you try to set a pixel to Color(255, 255, 255) but there is no such color in the palette, then the color will be set to a nearby color. Gray scale images will have identical RGB values for each pixel. For example, getColor(getPixel(p, x, y)) might give Color(125, 125, 125) for one position and Color(65, 65, 65) for another. When setting a color in a grayscale image, the single value is actually taken as the average of the 3 components. For example, if you tried:
graypic = takePicture("gray")
setColor(getPixel(graypic, 0, 0), Color(50, 100, 150)) # Doesn't do what you expect!
The color of that pixel would end up at 100, (50 + 100 + 150)/3 = 100.
If you wanted to actually make part of a grayscale image a color, then you would need to turn the grayscale into a color image, via something like:
# take a grayscale picture:
p = takePicture("gray")
# make a new color picture the same size:
colorPic = makePicture(getWidth(p), getHeight(p))
# go through each pixel and copy it to new color picture:
for p in getPixels(picture):
setColor(getPixel(colorPic, getX(p), getY(p)), getColor(p))
You can also save any picture to a file:
writePictureTo(picture, filename) # for compatibility with Mark Guzdial's book savePicture(picture, filename) # does the same as above, but has intuitive name
copyPicture() is effectively defined as:
def copyPicture(picture):
newPicture = makePicture(getWidth(picture), getHeight(picture))
for x in range(getWidth(picture)):
for y in range(getHeight(picture)):
setColor(getPixel(newPicture, x, y), getColor(getPixel(picture, x, y)))
return newPicture
Sound:
sound = makeSound(filename) # opens a file and returns a sound object play(sound) # plays the sound file through the computer's speakers
Examples
Processing by rows and cols:
from myro import *
picture = makePicture(pickAFile())
show(picture)
for i in range(getWidth(picture)):
for j in range(getHeight(picture)):
pixel = getPixel(picture, i, j)
setGreen(pixel, 255)
repaint() # not every time, just once per col
Processing by each pixel:
from myro import *
picture = makePicture(pickAFile())
show(picture)
for pixel in getPixels(picture):
setGreen(pixel, 255)
repaint()
Advanced Vision Functions
The Fluke can not only take images, but it can do some very simple image processing. In particular, a simple form of on-board image segmentation. If you want to track something in an image based on its color or brightness, the on-board color segmentation can be very useful since its faster than doing it in python. By default, the Fluke is set to track pink objects. You can also graphically select an object in the image to track. First use the show(picture) function and then drag a box around the object you want to track, the software will automatically determine the color bounding box.
We can use the Fluke's computer vision in two ways. First, we can grab a "blob" image from the Fluke. This image is a black and white image with the white pixels being part of the object of interest. Blob images can be transmitted faster than a full color picture.
p = takePicture()
show(p)
# select object in the image
b = takePicture("blob")
show(b)
For instance, here we see two images of a dog and her toy. The first is a regular color picture and the second is a blob image with the pink dog toy selected.
Another useful function is getBlob() that will return three items, the total number of pixels that fell inside the bounding box, and the average x and y locations of those pixels.
pixel_count, average_x, average_y = getBlob()
Rather than using the mouse to select the bounding box for segmentation, you can manually configure the Fluke using the configureBlob() function call:
configureBlob(y_low = 0, y_high = 255, u_low = 0, u_high = 255, v_low = 0, v_high = 255)
The parameters to configureBlob() create a bounding box in YUV space. Instead of using RGB which stands for Red/Green/Blue, YUV is an alternate way to describe color. The Y component contains the brightness or intensity information of the pixel, the U/V components contain the color.
Finally, you can also use getBlob() to locate bright pixels. We do this by segmenting bright pixels, meaning the Y components of the pixels are large :
configureBlob(y_low=100, y_high=255)
b = takePicture('blob')
show(b)
pxs, avg_x, avg_y = getBlob()
Graphics Objects Interface
Myro supports the Zelle graphics library with the following objects and methods:
The object oriented graph window can be used to create your own drawings:
win = GraphWin(title, width, height) # Alternately GraphWin(title) or GraphWin() win.setBackground(color) win.close() win.isClosed() # Returns True or False win.getMouse() # Returns a Point object of where the mouse is clicked win.setCoords(xLL, yLL, xUR, yUR) # See note below
Note: When initially created, the graphics window coordinates range from 0,0 (upper left corner) to width-1, height-1 (lower right corner). This function can be used to change the coordinates of the window (so, for example, it ranges from 0,0 to 1,1, or, to position the origin at the center, from (-1, -1 to 1,1). Note that you may need to undraw and redraw objects after a coordinate change.
Once you have a graph window created you can draw the following Graph Objects on it with their .draw() method:
Line(point1,point2) Circle(centerPoint, radius) Rectangle(topLeftPoint, bottomRightPoint) Oval(point1, point2) Polygon(point1, point2, point3, ...) Text(point, string) Image(centerPoint, pixmap)
"Pictures" from the robot can be converted to an "Image" using:
picture = takePicture() pixmap = makePixmap(picture) image = Image(Point(x, y), pixmap)
[In the beta version of Myro, you may pass a picture directly to the Image(centerPoint,picture) constructor and it will do the picture to pixmap conversion for you. ]
Each of the above graph objects have the following methods:
setFill(color) setOutline(color) setWidth(pixels) draw(aGraphWin) undraw() move(x,y) # relative distance from current position clone() # makes a copy of the object
See the Example section below for a demonstration of how to use the functions.
For a complete list and details on how each function works click here.
For a single page handout, download the: media:myro_graphics_reference.pdf
Example
Using the graphics window for pictures:
win = GraphWin() image = Image(Point(0, 0), makePixmap(picture)) image.draw(win) win["width"] = 451 win["height"] = getHeight(picture) + 10 image.move(10,10) image.refresh(win)
Using the graphics window to draw:
from myro import *
win = GraphWin("My Window", 500, 500) # GraphWin(string, width, height)
color = color_rgb(100, 200, 50) # red, green, and blue are values from 0 to 255
win.setBackground(color) # sets background color of window to the color we created
point = Point(100,25) # creates a point referencing location (100,25)
message = Text(point, "Click on window") # creates message "Click on window" anchored at location (100,25)
message.draw(win) # puts the message on the graph window
click = win.getMouse() # Waits for user's mouse click and returns as a Point object
message.undraw() # erases message from the graph window
text = Text(click, "Some Text") # creates text "Some Text" anchored at location you clicked
text.draw(win) # adds the text to the graph window
topLeftPoint = Point(150,150) # creates the point for top left corner of the oval's bounding box
bottomRightPoint = Point(300,400) # creates the point for bottom right corner of the oval's bounding box
oval = Oval(topLeftPoint,bottomRightPoint) # creates the oval
redColor = color_rgb(255,0,0) # defines the color red
oval.setFill(redColor) # colors the oval red
oval.draw(win) # draws the oval to the graph window
wait(3) # Window will close in 3 seconds
win.close() # Closes the window
Miscellaneous commands
wait(seconds) - Pause for the given amount of seconds. Seconds can be a decimal number.
>>> wait(5) >>>
currentTime() - the current time, in seconds from an arbitrary starting point in time, many years ago. Can you figure out the date of the start time?
>>> currentTime() 1164956956.2690001
makeStory() - A type of MadLibs system for making up stories that get their variables (noun1, verb2, etc) filled in by the user. Myro will read back their story. Enter variables() in Myro to see a couple of examples.
numberGame() - A High-Low number-guessing game where the students learn to divide and conquer to guess a number.
odd(n) - returns True if n is odd
even(n) - returns True if n is even
Random decisions
flipCoin() - Returns "heads" or "tails" randomly.
>>> flipCoin() 'tails' >>> flipCoin() 'tails' >>> flipCoin() 'heads'
heads() - returns True 50% of the time
tails() - returns True 50% of the time
pickOne(value) or pickOne(value1, value2, ...) - Returns a number or element randomly. New in Myro 1.0.2
>>> pickOne(5)
0 # randomly returns 0 through 4 evenly over time
>>> pickOne(2, 4, 6, 8)
6 # randomly returns 2, 4, 6, or 8 evenly over time
>>> pickOne("red", "white", "blue", "green")
6 # randomly returns "red", "white", "blue", or "green" evenly over time
randomNumber() - Returns a random number between 0 (inclusive) and 1 (exclusive).
>>> randomNumber() 0.65218366496862357
File and Folder Functions
pickAFolder() - allows you to select a folder
>>> pickAFolder() 'C:/Python24'
pickAFile() - allows you to select a file
>>> pickAFile() 'C:/Python24/README.txt'
Media Functions
readSong(filename) - reads a file in the Song File Format and returns a list of tuples.
makeSong(text) - make a song in the Song File Format where lines are separated by semicolons.
>>> makeSong("c 1; g 1/4; a 1/2; e 3/4;")
[(523.29999999999995, 1.0), (784.0, 0.25), (880.0, 0.5), (659.29999999999995, 0.75)]
>>> singsong = makeSong("c 1; g 1/4; a 1/2; e 3/4;")
saveSong(text or song, filename) - saves a song in tuple format, or in text format
playSpeech(filename) - play a WAV file
saveSpeech(message, filename) - save the message as a WAV file
Web development
In order to use the web development you first need to run the register() function. You will need to enter the fields as below:
Your email address : (your email address) Your robot's name : (any name up to 16 characters, no spaces or other punctuation) Course keyword : owls OR yjackets OR yellowj Create a Myro password: (any password, don't use a good one, but it is encrypted)
The keyword is a code that determines school and section number.
For example, here are some valid entries:
Your email address : dblank@brynmawr.edu Your robot's name : Theodore Course keyword : owls Create a Myro password: *********
Your email address : someone@mailinator.com Your robot's name : Robokiller Course keyword : yjackets Create a Myro password: *****
Your email address : someoneelse@mailinator.com Your robot's name : TheDude Course keyword : yellowj Create a Myro password: *****
If you have a robot connected, it will set the robot's name. Otherwise, when you connect your robot, you should name your robot the same name:
setName("Theodore")
setName("Robokiller")
You can now surf to your page and edit your HTML section if you wish:
http://myro.roboteducation.org/myweb/
To login in, use all lowercase for the robot name, even if you registered it with uppercase letters. The password is case sensitive.
To send a picture to your website, use the sendPicture() function:
sendPicture(picture, photoname, password, robotname = None)
If you leave robotname off, sendPicture() will ask the robot what its name is.
There is currently a limit on the size of a picture that can be sent. Only pictures about the size from the camera will work. You'll get a message if it is too large.
Here is a full example:
from myro import * register() # opens up window initialize() picture = takePicture() sendPicture(picture, "dormroom3", "bash72hg") # robot's name is "theodore" so that will get sent
If you need to change your password, use the command:
setPassword(robotName, emailAddress, newPassword)
takePicture("color" | "blob" | "gray")
setWhiteBalance("on" | "off" | 0 | 1)
set("whitebalance", value)
Gamepad
There are two commands: getGamepad() and getGamepadNow()
- getGamepad() waits for an event before returning (ie, is blocking),
- getGamepadNow() will immediately return the current state of the gamepad.
Gamepad Examples
>>> getGamepad("count")
2
>>> getGamepad("button") # waits till you press at least one button
[0, 0, 1, 0, 1, 0, 0, 0]
>>> getGamepad(1, "button") # waits till ID 1 presses at least one button
[1, 0, 0, 0, 0, 0, 0, 0]
>>> getGamepad(range(getGamepad("count")), "button")
# waits till someone presses a button
[[0, [1, 0, 0, 0, 0, 0, 0, 0]],
[1, [0, 0, 0, 0, 0, 0, 0, 0]]]
>>> getGamepad("button", "axis", wait=.01)
{"button": [1, 0, 0, 0, 0, 0, 0, 0],
"axis": [-0.999969482421875, 0.0]}
(sometimes axis doesn't return exactly 1 or -1).
Here is a short, useful program:
>>> while 1: move(*getGamepad("robot"))
Here is a more functional one:
done = False
while not done:
results = getGamepad("button", "robot")
move(*results["robot"])
if results["button"][1]: beep(.5, 440)
if results["button"][2]: beep(.5, 880)
done = (results["button"][0] == 1)
Gamepad Details
- getGamepad("count") - returns (immediately) the number of gamepads connected
- getGamepad(ID, ITEM, ...) - return the ITEMs for gamepad ID. ID can be left out and will default to 0, the first one. If you request more than one ITEM, then they come back in a dictionary. Just request one ITEM and you'll get the value (as a list, string, or number).
- getGamepad([ID1, ID2...], ITEM, ...) - return the ITEMs for gamepad IDs as a list of lists of ID, RESULTS. For example:
- >>> getGamepad([0, 1], "button", "axis")
- [[0, {'button': [0, 0, 0, 0, 0, 0, 0, 0], 'axis': [0.0, 1.0]}], [1, {'button': [1, 1, 0, 0, 0, 0, 0, 0], 'axis': [-1.0, -1.0]}]]
- >>> getGamepad([0, 1], "axis")
- [[0, [0.0, 1.0]], [1, [-1.0, -1.0]]]
- getGamepad() has one keyword argument, "wait" for setting a sleep value between gamepad polls. Default is 0.05 seconds. Setting to zero will have small latency, but may eat up your CPU.
ITEM can be:
- "count" - returns (immediately) number of gamepads plugged in
- "robot" - returns axis values (floats) ready to be used by move() Myro command as [translate, rotate]
- empty - if nothing is passed in, it returns all of the following as a dictionary
- "init" - has this gamepad been initialized? as boolean
- "name" - name of gamepad, as string
- "axis" - returns values of axis controller in a list (as floats)
- "ball" - returns values of ball controller in a list
- "button" - returns values of buttons in a list (as integers)
- "hat" - returns values of hat in a list
Here is a short little demo of how you could write a multi-player "game" where each player has a gamepad controller and appears as a circle on the screen.
from myro import *
def game():
win = GraphWin("My Game!", 500, 500)
numplayers = getGamepad("count")
colors = ['red', 'blue', 'green', 'yellow', 'orange']
players = []
# Create the players:
for p in range(numplayers):
circle = Circle(Point(randomNumber() * 500,
randomNumber() * 500), 10)
circle.setFill(colors[p])
players.append(circle)
players[-1].draw(win)
# Let's play!
speak("Red is it! Don't let red touch you!")
while True:
for (id, data) in getGamepadNow(range(numplayers),"axis","button"):
players[id].move(data["axis"][0] * 20,
data["axis"][1] * 20)
if data["button"][0]: # fire a missile
computer.beep(.1, 440 * 2 ** id)
wait(.1)
The window produced with the show(picture) command allows mouse clicks. The clicks will display the (x,y) and (r,g,b) in a status bar. Drag a rectangle to set YUV ranges for blob-tracking.
getPixels() returns a generator object. Therefore, you cannot get a pixel by index.
The Myweb webpages give some notes. The images that a user has will be available when he/she edits their page. Images are placed in /myweb/data/robotname/*.jpg. Therefore one can:
sendPicture(takePicture(), "my-house", "PassWoRDz") # assumes robot is connected, to take picture and get name sendPicture(takePicture(), "my-house", "PassWoRDz", "kitty") # you can provide the name explicitly, also
and refer to it picture with:
<img src="/myweb/data/kitty/my-house.jpg">
Arrays
The Array() class, and makeArray() function:
a = Array() # zero dimensions a = Array(10) # one dimension, 10 elements long >>> a[9] 0 >>> a = Array(2, 3, 4) # 3 dimensions >>> a[0][0][0] 0 >>> a[0][0][0] = 8 >>> a[0][0][0] 8 >>> a <myro.Array object at 0x0160AC10>
makeArray can also take a Picture:
>>> p = makePicture(10, 10) >>> array = makeArray(p) >>> array[0] <myro.Column object at 0x0161BB90> >>> array[0][0] <Pixel instance (r=0, g=0, b=0) at (0, 0)> >>> array[0][1] <Pixel instance (r=0, g=0, b=0) at (0, 1)> >>> array[1][1] <Pixel instance (r=0, g=0, b=0) at (1, 1)> >>> setColor(array[1][1], Color(100, 50, 25)) >>> array[1][1] <Pixel instance (r=100, g=50, b=25) at (1, 1)>
System commands
To upgrade your Myro program files, you can issue the command:
>>> upgrade("myro")
You must have write permissions for your Python installation (and other areas) for this to work. Afterwards, please restart Python.
>>> upgrade("fluke")
>>> upgrade("scribbler")
Robot Object Interface
robot = Scribbler(port) - robot constructor for the Scribbler; may ask for a port. You may also provide a name, which causes Myro to search the ports for such a robot.
>>> robot = Scribbler()
>>> robot = Scribbler("Scribby")
>>> robot = Scribbler("com4")
robot = Surveyor(port) - real robot constructor for the SRV-1; may ask for a port (this is under development)
robot = Create(port) - real robot constructor for iRobot's Create; may ask for a port (this is under development)
robot = Roomba(port) - real robot constructor for iRobot's Roomba; may ask for a port (this is under development)
robot = SimScribbler() - simulator constructor (this is currently under development)
Computer Object
The computer object is automatically created. In addition to the robot, the computer can also make sounds.
computer.speak(message) - computer will say the text message
computer.stopSpeaking() - stop talking
computer.setVoice(name) - set the voice to a named voice
computer.getVoice() - get the name of the current voice
computer.getVoices() - get alternative set of named voices
computer.playSpeech(filename) - play a speech file (wav file)
computer.saveSpeech(message, filename) - save speech to a wav file
computer.beep(duration, frequency, [frequency2]) - makes a sound from computer. Duration is given in seconds (floats are ok).
computer.playSong(song) - play a song in the Song File Format
Instant Messaging Interface
You can send and receive messages from other Myro users.
>>> chat = Chat("myname", "mypassword")
>>> chat.send("somebodyelse", "Hi, how are you?")
>>> chat.receive()
[("sombodyelse@myro.roboteducation.org", "I'm fine, thanks!")]
Remote Robot Control
The robot that will be controlled:
>>> robot.initializeRemoteControl("mypassword")
>>> robot.processRemoteControl()
>>> []
>>> robot.processRemoteControlLoop() # threaded, infinite loop
>>>
The computer that will be the controller:
>>> chat = Chat("myname", "mypassword")
>>> chat.send("remoterobotname", "robot.turnLeft(.4)")
>>> chat.receive()
There is also a RemoteRobot constructor which acts like a regular robot, but sends the commands to the other robot.
>>> robot = RemoteRobot("remoterobotname")
>>> robot.turnLeft(.4)
Robot's Orientation
If you are using a bluetooth-serial adapter or a serial cable to control your robot, then the scribbler's normal forward direction is used. When using the Fluke the forward direction is flipped. "Forward" is in the direction of the Fluke's camera. However, the orientation of the scribbler can be manually changed using the setForwardness() function. This is particularly useful if you want to use the Scribbler's IR and light sensors.
setForwardness(orientation): orientation can be 0/"scribbler-forward" or 1/"fluke-forward"
getForwardness(): Returns the orientation of the robot "scribbler-forward" or "fluke-forward"
